基本細節:1769-PB2 CompactLogix I/O電源 物理尺寸為 118 x 70 x 87 毫米

1769-PB2 是一款CompactLogix I/O電源。該電源的輸入電壓范圍為 19.2-31.2V DC，電流容量為 2.0 A @ 5VDC 和 0.8A @ 24VDC。該電源模塊能夠?yàn)槎噙_(dá)十六 （16） 個 CompactLogix 模塊供電。
1769-PB2 的額定輸入電壓為 19.2-31.2VDc，標稱電壓為 24VDC。一旦提供適當?shù)妮斎腚妷海?769-PB2 能夠提供 2.0 A @ 5VDC 和 0.8A @ 24VDC 的輸出電流。該模塊設計用于承受 30 A @ 31.2V DC 的浪涌電流。
該 1769-PB2 功耗為 50 VA @ 24V DC 和功耗 7.5 W @ 60° C （140° F）.它有一個內部安裝的保險絲用于保護。兼容的保險絲是 Wickmann 19193-6.3A 和 Littelfuse 021706.3MXP。

1769-PB2 的重量約為 525 克（1.16 磅），物理尺寸為 118 x 70 x 87 毫米（4.65 x 2.76 x 3.43 英寸）。該I/O電源支持直接面板安裝或DIN導軌安裝，遵循CompactLogix平臺支持的安裝方法。
進行信號接線和連接到此 I/O 電源時，合適的電線尺寸為 14 AWG （2.5 mm2），絕緣額定值為 90 °C （194 °F） 或更高，絕緣厚度為 1.2 毫米（3/64 英寸）的實心銅線。它有一個開放式外殼，因此，整個CompactLogix組件的電源必須安裝在一個外殼內，以提供足夠的工業元件保護。

該電源模塊內置 Wickmann 19193-6.3A 或 Littelfuse 021706.3MXP 保險絲。1769-PB2 具有印刷的端子識別圖、手指安全蓋、上下面板安裝卡舌以及用于安全安裝和操作的屏障式接線端子。
1769-PB2 在 24 伏直流電時電源兩側的輸出電流容量為 1 安培，或者在 5 伏直流電時各提供 2 安培的電流。它的電源距離額定值為 8，允許在電源的每一側連接多達 8 個 I/O 模塊。它還具有最小 10 毫秒和最大 10 秒的斷線周期。

1769-PB2 模塊的輸入電壓范圍為 19.2 至 31.2 V DC，標稱輸入電壓為 24 V DC。其功耗在 24 伏直流時為 50 VA，而在 31.2 伏直流時的最大浪涌電流為 30 安培。它在 2 伏時的電流容量為 5 安培，在 0.8 伏時的電流容量為 24 安培，在 7.5 華氏度時的功耗為 140 瓦。1769-PB2 的連續隔離電壓為 75 伏，非冷凝相對濕度范圍為 5 至 95%。其工作溫度范圍為 32 至 140 華氏度，存儲溫度范圍為 -40 至 185 華氏度。它還可以承受 5 至 10 赫茲的 500 G 工作振動、50 G 的非工作沖擊和 30 G 的工作沖擊。

1769-PB2

The 1769-PB2 is a CompactLogix I/O power supply. The power supply has an input voltage range of 19.2-31.2V DC and current capacities of 2.0A@5VDC and 0.8A@24VDC. The power module is capable of powering up to sixteen (16) CompactLogix modules.
The 1769-PB2 has a rated input voltage of 19.2-31.2VDc and a nominal voltage of 24VDC. Once the appropriate input voltage is provided, the 1769-PB2 is capable of delivering 2.0A@5VDC and 0.8A@24VDC output currents. The module is designed to withstand a surge current of 30A@ 31.2V DC.

The 1769-PB2 consumes 50 VA@ 24V DC and 7.5 W @ 60° C (140° F). It has an internally mounted fuse for protection. Compatible fuses are Wickmann 19193-6.3A and Littelfuse 021706.3MXP.
The 1769-PB2 weighs about 525 grams (1.16 pounds) and has a physical size of 118 x 70 x 87 mm (4.65 x 2.76 x 3.43 inches). The I/O power supply supports either direct panel mounting or DIN rail mounting, following the mounting methods supported by the CompactLogix platform.

For signal wiring and connection to this I/O power supply, the appropriate wire size is 14 AWG (2.5 mm2), solid copper wire with an insulation rating of 90 °C (194 °F) or higher, and an insulation thickness of 1.2 mm (3/64 inch). It has an open housing, so the power supply for the entire CompactLogix component must be installed in one housing to provide adequate protection for industrial components.
The power module has a built-in Wickmann 19193-6.3A or Littelfuse 021706.3MXP fuse. The 1769-PB2 has a printed terminal identification diagram, finger safety cover, upper and lower panel mounting latches, and screen terminals for safe installation and operation.

The 1769-PB2 has an output current capacity of 1 amp on both sides of the supply at 24 volts DC, or 2 amps on each side at 5 volts DC. It has a power distance rating of 8, allowing up to 8 I/O modules to be connected on each side of the power supply. It also has a minimum of 10 milliseconds and a maximum of 10 seconds of disconnection periods.
The 1769-PB2 module has an input voltage range of 19.2 to 31.2 V DC, with a nominal input voltage of 24 V DC. Its power consumption is 50 VA at 24 volts DC, while the maximum inrush current is 30 amps at 31.2 volts DC. It has a current capacity of 5 amps at 2 volts, 24 amps at 0.8 volts, and 140 watts of power consumption at 7.5 degrees Fahrenheit. 1769-PB2 has a continuous isolation voltage of 75 volts and a non-condensing relative humidity range of 5 to 95%. Its operating temperature range is 32 to 140 degrees Fahrenheit and its storage temperature range is -40 to 185 degrees Fahrenheit. It can also withstand 500 G of working vibration at 5 to 10 Hz, 50 G of non-working shock and 30 G of working shock.

如果您需要查詢或購買，請將產品型號發送到我的電子郵件或直接致電我

銷售經理:何經理

手機: + 86 18005021035

郵箱:?18005021035@163.com

與成都陽光熹禾合作我們提供一流的服務，實現更快的速度，交付多樣化的零件!

1.在24小時內及時回復您

2.交貨時間快

3.最好的服務，合理的價格

4.在生產線上工作多年，有良好的口碑

▲更多相關型號:1769-PB2 CompactLogix I/O電源 物理尺寸為 118 x 70 x 87 毫米