Allen-Bradley 1756-incubed tr是Controloaix通信模塊系列的-部分。它是一個以太網/IP(以太網工業協議)雙端口接口通信模塊。它支持通用消息傳遞、實時/0消息傳遞以及實時控制、時間同步和運動等應用的信息交換。1756-in-tr還通過允許同時傳輸安全和控制數據以及診斷信息，符合CIP安全標準。它使用先進的通信芯片和物理介質。
1756-sin gent tr模塊具有10 – 100 Mbps以太網/IP通信速率，并使用雙銅線。它支持256個Logix和128個TCP/IP通信連接。它可以在以大網/IP網絡上支持最多8個軸的集成運動，并在5.1V DC下消耗1 A電流。它的最大功耗為51瓦，熱耗散為17.4 BTU/小時。它可以安裝在ControlLoqx機箱的任何插槽中。對于布線，它使用非屏蔽RJ45，5類，雙絞線電貨連接器與控制器接工。要運行以太網/IP網絡，需要IP地址、子網掩碼、網關等參數。必須定義。
1756-1756 tr橋具有各種功能，如支持消息傳遞、分布式/0和標簽。它將消息封裝在標準的TCP/IP協議中。ControlNet和DeviceNet網絡協議允許它共享一個公共的應用層。1756-1756 tr不需要任何調度或路由表來存儲信息。其他功能包括顯式保護模式、電子密鑰、設備級環形網絡和并行幾余協議網絡支持。
1756-in-tr是ControLogix以大網通信模塊，專門設計用于幾余以太網。通過嵌入式雙RJ545端口，支持以太網協議和10/100Mbps傳輸速度，具有自動協商功能，該模塊增加了以太網網絡的可用性。
該模塊支持環型和星型拓?fù)浣Y(jié)構以及合格的合作設備，如Flex 0、POINT 10幾余以太網適配器、CompactLogix和ControlLogix，該模塊還支持向其他Alen-Bradley控制器(如SLC 500、PLC-5和Microloaix控制器)發送消息，它還兼容與相同Allen-Bradley甚至第三方產品的人機界面(HMI)、監控和數據采集(SCADA)通信。它還可以與endosure合作伙伴模塊和第=方網關、轉換器和設備合作。
該模塊還支持計算機和編程工作站的嵌入式以太網通信，因此，無需購買昂貴的通信適配器來建立與控制器的連接。此外，該模塊所需的電纜為5類或6類電纜，可制作成通信電纜。

1756-EN2T

1756-EN2T A-B 以太網通信模塊分散控制系統是專門為工業過程控制設計的過程儀表控制系統，也稱為集散控制系統。按照可編程控制器的發展歷程和DCS發展歷程的分析，分散控制系統的主要應用場合是連續量的模擬控制，而可編程控制器的主要場合是開關量的邏輯控制。因此在設計思想上有一定的區別。
在工廠自動化或計算機集成過程控制系統中，為了分散危險和分散功能，采用分散綜合的控制系統結構。可編程控制器是分散的自治控制系統，它可以作為下位機完成分散的控制功能，與直接數字計算機的集中控制比較有質的飛躍。這種遞階控制系統也是分散控制系統的基礎。

1756-EN2T

Allen-Bradley 1756-incubed tr is part – of the Controloaix communication module family. It is an Ethernet /IP(Ethernet Industrial Protocol) dual-port interface communication module. It supports universal messaging, real-time /0 messaging, and information exchange for applications such as real-time control, time synchronization, and motion. The 1756-in-tr also complies with CIP security standards by allowing simultaneous transmission of security and control data as well as diagnostic information. It uses advanced communication chips and physical media.
The 1756-sin gent tr module has a 10-100 Mbps Ethernet /IP communication rate and uses double copper wires. It supports 256 Logix and 128 TCP/IP communication connections. It can support integrated motion of up to 8 axes on A large network /IP network and consume 1 A current at 5.1V DC. It has a maximum power consumption of 51 watts and a heat dissipation of 17.4 BTU/ hour. It can be installed in any slot in the ControlLoqx case. For cabling, it uses an unshielded RJ45, Class 5, twisted pair electrical cargo connector to connect with the controller. To run an Ethernet /IP network, you need parameters such as an IP address, subnet mask, gateway, etc. Must be defined.
The 1756-1756 tr bridge has various features such as support for messaging, distributed /0, and labeling. It encapsulates the message in the standard TCP/IP protocol. The ControlNet and DeviceNet network protocols allow it to share a common application layer. The 1756-1756 tr does not require any scheduling or routing tables to store information. Additional features include explicit protection mode, electronic keys, device-level ring networking, and parallel multiprotocol networking support.
The 1756-in-tr is a ControLogix to large network communication module, specially designed for several Ethernet. With embedded dual RJ545 ports, support for Ethernet protocols and 10/100Mbps transfer speeds, with auto-negotiation capabilities, the module increases the availability of Ethernet networks.
The module supports ring and star topologies and qualified partner devices such as Flex 0, POINT 10 Ethernet adapters, CompactLogix, and ControlLogix. The module also supports sending messages to other Alen-Bradley controllers such as SLC 500, PLC-5 and Microloaix controllers, and it is compatible with human machine interface (HMI), monitoring and Data acquisition (SCADA) communications with the same Allen-Bradley and even third-party products. It can also work with endosure partner modules and square gateways, converters and devices.
The module also supports embedded Ethernet communication for computers and programming workstations, so there is no need to purchase an expensive communication adapter to establish a connection to the controller. In addition, the cable required for the module is Class 5 or Class 6 cable, which can be made into a communication cable.

The 1756-EN2T A-B Ethernet communication module decentralized control system is A process instrument control system specially designed for industrial process control, also known as distributed control system. According to the analysis of the development of programmable controller and DCS, the main application of distributed control system is continuous analog control, and the main application of programmable controller is the logic control of switching quantity. Therefore, there are certain differences in design ideas.
In factory automation or computer integrated process control system, in order to disperse risk and disperse function, a decentralized integrated control system structure is adopted. Programmable controller is a decentralized autonomous control system, which can be used as a subordinate computer to complete decentralized control functions, and has a qualitative leap compared with the centralized control of direct digital computer. This hierarchical control system is also the basis of decentralized control systems.

1756-EN2T