Frofibus DF 總線是一種現場總線，符合工業通訊要求。
TSXPBY100是Schneider生產的電氣化學組件，用于測量有毒和無毒氣體，如一氧化碳、氧氣和氫氣等。
電氣化學組件通常基于化學氧化與化學還原的主要方法，并產生與被測氣體成比例的電流。TSXPBY100電氣化學組件由三個電極組成，即工作極（WE）、計數器極（CE）和基準極（RE）。其中，WE氧化或者還原目標氣體，然后產生一個與氣體濃度成比例關系的電流；CE平衡所產生的電流；RE則維持工作電極電位，保證正確的工作區。

TSXPBY100

Frofibus 總線是一種操作過程集中化的主/從式線性總線。這種模式下，只有主工作站，或稱活動工作站，才擁有對總線的訪問權限從站或無源工作站只能對提示作出響應。通過令牌總線協議，不同主機之間也可實現互相通訊。物理連接采用的是單層屏蔽雙統線，但也通過光纖接口來實現樹形、星形或環形結構。因?yàn)橛脩艚缑娴臄?shù)據是通過簡單的變里映射直接連接到數據路層的，所以這種總線和IS0網絡模型不同，它只實現了第1、2 兩層。
配
Profibus DP 總線應當由sycon 軟件配置，這需要單獨定購，型號是:SYC SPV LF*CD29M。這個軟件可生成特定文件，文件中含有關于網絡上所連設備的信息。這套擴展文件可通過umity Fr編程軟件導入到PC應用程序中去

TSXPBY100

The Frofibus DF bus is a field bus that meets the requirements of industrial communication.
TSXPBY100 is an electrochemical component manufactured by Schneider for the measurement of toxic and non-toxic gases such as carbon monoxide, oxygen and hydrogen.
The electrochemical components are usually based on the main methods of chemical oxidation and chemical reduction and produce an electric current proportional to the gas being measured. The TSXPBY100 electrochemical assembly consists of three electrodes, namely, the working pole (WE), the counter pole (CE) and the reference pole (RE). Where WE oxidize or reduce the target gas, and then generate a current proportional to the gas concentration; The current generated by CE balance; RE maintains the working electrode potential to ensure the correct working area.

Frofibus is a master/slave linear bus with centralized operation process. In this mode, only the primary, or active, workstation has access to the bus and the secondary or passive workstation can only respond to prompts. Through the token bus protocol, different hosts can also communicate with each other. The physical connection uses a single shielded dual line, but also through the fiber interface to achieve a tree, star or ring structure. Because the user interface data is directly connected to the data path layer through a simple variable mapping, this bus is different from the IS0 network model, which only implements layers 1 and 2.
with
The Profibus DP bus should be configured by sycon software, which needs to be ordered separately, model number :SYC SPV LF*CD29M. This software generates specific files that contain information about the devices connected to the network. This set of extensions can be imported into a PC application using the umity Fr programming software

TSXPBY100