3500/64M動態壓力監測器是一個單，四通道監測器，從高溫接受輸入壓力傳感器，并使用此輸入來動警報，的監視器每個通道的一個測量變量是帶通動態壓力?？梢允褂?500機架配置軟件進行以下操作配置帶通角頻率與一個附加陷波濾波器。監視器提供一個記錄器輸出控制系統的應用主要用途為3500/64M動壓。
監視器是提供以下內容
1.連續比對保護機器根據配置的告警監控參數驅動警報的設定值
2.操作所需的基本機器信息維修人員每個通道，根據配置，限制其輸入信號產生的各種參數稱為被測變量?？梢耘渲镁瘓蠛臀ｋU設定值每個活躍的測量變量低和高過濾模式是選項通道。通道1和通道2形成一對，并且通道3和4是另一對。可能在每個上選擇不同的帶通選項通道對的通道。然而，渠道在對內操作必須相同過濾模式。

350092-

The 3500/64M dynamic pressure monitor is a single, four-channel monitor that accepts input pressure sensors from high temperatures and uses this input to move alarms, one of the measured variables of the monitor per channel is the bandpass dynamic pressure. The following can be done using 3500 rack configuration software to configure the bandpass angular frequency with an additional notch filter. The monitor provides a recorder output control system for applications primarily intended for 3500/64M dynamic pressure.
The monitor is provided with the following
1. Continuously compare the protection machine to drive the alarm Settings based on the configured alarm monitoring parameters
2. The basic machine information required for operation maintenance personnel each channel, according to the configuration, limits the various parameters generated by its input signal called the measured variables. Alert and hazard setpoints can be configured for each active measurement variable Low and high filter modes are option channels. Channels 1 and 2 form a pair, and channels 3 and 4 are the other pair. Channels for different band-pass option channel pairs may be selected on each. However, channels must operate in the same filtering mode internally.

350092-

其他型號推薦：

350064M