ADV551-P63/D5A00是一款數字I/O模塊，可接收來自現場的接觸或電壓狀態信號，并通過晶體管觸點向現場輸出狀態信號。該模塊兼容CENTUM-ST系統，具有脈沖寬度輸出功能和時間比例輸出功能。
使用日本橫河電機株式會社的數字I/O模塊ADV551-P63/D5A00需要按照以下步驟進行操作：
將模塊連接到控制器：使用模塊附帶的連接器將模塊連接到控制器的I/O槽位上。
設置模塊參數：使用控制器的編程軟件或硬件設置模塊的參數，包括輸入類型、輸出類型、脈沖寬度輸出和時間比例輸出等。
編寫控制程序：使用控制器的編程語言編寫控制程序，將模塊作為控制器的輸入或輸出設備進行使用。
測試模塊：在編程完成后，使用控制器的調試工具或軟件對模塊進行測試，確保模塊的工作正常

ADV551-P63D5A00

The ADV551-P63/D5A00 is a digital I/O module that receives contact or voltage status signals from the field and outputs status signals to the field via transistor contacts. The module is compatible with CENTUM-ST system and has pulse width output function and time proportional output function.
To use Yokogawa Electric’s digital I/O module ADV551-P63/D5A00, you need to follow the following steps:
Connect the module to the controller: Use the connector that came with the module to connect the module to the controller’s I/O slot.
Set module parameters: Use the controller’s programming software or hardware to set module parameters, including input type, output type, pulse width output, and time proportional output.
Write a control program: Write a control program using the programming language of the controller, using the module as an input or output device of the controller.
Test module: After the programming is completed, the debugging tool or software of the controller is used to test the module to ensure that the module works normally

其他型號推薦：