CPU3680 MOTOROLA 處理器模塊
采用內置低功耗平臺的ARM?處理器(600MHz、T.I. Cortex-A8)的SoC 「AM3354」，在確保足夠執行能力的同時，實現了低消費電力。
減輕維護保全業務的無風扇設計
廢除CPU風扇、存儲器采用SD卡、完全無轉動機構設計。另外，使用產品附帶的防水墊圈、防水螺釘設置時，前端部分防止粉塵或異物侵入，能夠滿足IP65標準的防水規格。極力減少易老化零部件的使用，大幅度減輕了維護保全業務的負擔。
節省空間的設計，貢獻于裝置的小型化
采用5.7英寸LCD的小型、輕量[大約0.8kg]的觸摸屏一體型PC機。貢獻于裝置的小型化。還可利用VESA規格100×100mm標準的安裝結構，安置在LCD支架。

CPU3680

配置USB、LAN等計算機的標準擴展接口
配置了USB×1、100BASE-T×1、RS-232C×1等接口機能。同時附帶各個接口的驅動軟件。
CPU3680 MOTOROLA 處理器模塊
附帶支持系統開發的軟件工具“CONTEC Manager”
配置了FTP服務器機能、時間表功能、利用NTP的自動時間調整機能、Auto RUN機能等，有助于構件系統的軟件工具“CONTEC Manager”。
CPU3680 MOTOROLA 處理器模塊整個系統工作流程可以簡單描述如下：系統上電后，首先DSP由flash實現自舉，并運行引導程序，之后轉入EDMA等待狀態，F(xiàn)PGA初始化后等待外部圖像采集命令，收到圖像采集命令后開始進行圖像采集，并對采集到的圖像進行預處理，預處理后的圖像經過FIFO緩沖，在存儲一定量的數據之后，F(xiàn)PGA通過半滿信號向DSP發送EDMA請求，等待DSP響應，DSP一旦收到來自FPGA的EDMA請求，立即建立EDMA通道，從FIFO中讀取數據到L2存儲器，存滿一幀圖像后DSP開始圖像壓縮，等待一幅圖像壓縮完成之后，DSP會向FPGA發送中斷信號，F(xiàn)PGA在收到中斷信號后開始從 FIFO中讀取壓縮后的圖像數據。一幀數據讀完后，判斷編碼信號是否有效，如果有效則按同樣的規則對下一幀圖像進行壓縮，如果無效則通知DSP結束。

CPU3680

CPU3680 MOTOROLA Processor module
ARM with a built-in low-power platform? The SoC “AM3354” with a 600MHz processor (T.I. Cortex-A8) achieves low power consumption while ensuring sufficient execution capacity.
A fanless design that eases maintenance security
The CPU fan is abolished, the memory is SD card, and there is no rotating mechanism design. In addition, when using the waterproof washer and waterproof screw attached to the product, the front part prevents dust or foreign body intrusion, and can meet the waterproof specifications of IP65 standard. Minimize the use of easily aged parts, greatly reducing the burden of maintenance and security business.
The space-saving design contributes to the miniaturization of the device
Small, lightweight [approximately 0.8kg] touchscreen one-body PC with a 5.7 inch LCD. Contribute to the miniaturization of the device. It can also be installed in the LCD bracket with VESA standard 100×100mm mounting structure.
Standard extension interfaces for computers such as USB and LAN are configured
USB×1, 100BASE-T×1, RS-232C×1 and other interface functions are configured. At the same time, the driver software of each interface is attached.
CPU3680 MOTOROLA Processor module
Includes software tool “CONTEC Manager” to support system development
CONTEC Manager, a software tool for building the system, is equipped with FTP server function, schedule function, automatic time adjustment function using NTP, Auto RUN function, etc.
CPU3680 MOTOROLA Processor Module The entire system workflow can be simply described as follows: After the system is powered on, the DSP is bootstrapped by flash first, and the boot program is run, and then it is transferred to the EDMA waiting state. After initialization, the FPGA waits for the external image acquisition command. After receiving the image acquisition command, the image acquisition begins, and the acquired image is preprocessed. After storing a certain amount of data, FPGA sends EDMA request to DSP through half-full signal, waiting for DSP response. Once DSP receives EDMA request from FPGA, it immediately establishes EDMA channel, reads data from FIFO to L2 memory, and starts image compression after storing one frame of image. After an image compression is completed, the DSP sends an interrupt signal to the FPGA, and the FPGA begins to read the compressed image data from the FIFO after receiving the interrupt signal. After reading a frame of data, the encoded signal is judged whether it is valid. If it is valid, the next frame image is compressed according to the same rules. If it is invalid, the DSP is notified to end.

CPU3680