IS220PPROH1A是一個渦輪機專用1/0模塊。它旨在為特定的滿輪機現場設備提供直接接口。這種設置消除或減少了以前連接現場設備所需的大量儀器，還提高了運行可靠性，減少了長期維護。IS220PPROH1A通常與TREAH A端子板配合使用，用于航改式汽輪機緊急跳閘應用。該組件可以接到屏障型或箱式端子板。IS220PPROH1A具有電壓檢測的現場布線限制，將電纜長度限制為1000英尺的18 AWG布線，需要注意的是，在將BPPB P-Pack與BPPC P-Pack交換時，IS220PPROH1A不能自動重新配置
IS220PPROH1A內置一個高速處理器和兩個完全獨立的10/100以太網端口。該包有一個硬件復位電路和看門狗定時器。溫度由內部傳感器監(jiān)控.

IS220PPROH1A

IS220PPROH1A is a turbine-specific 1/0 module. It is designed to provide a direct interface for specific full-turbine field equipment. This setup eliminates or reduces the large number of instruments previously required to connect field equipment, and also improves operational reliability and reduces long-term maintenance. The IS220PPROH1A is usually used in conjunction with the TREAH A terminal plate for emergency trip applications in aero-modified steam turbines. The assembly can be connected to a barrier type or box type terminal plate. The IS220PPROH1A has a field wiring limit for voltage detection, limiting the cable length to 18 AWG wiring of 1000 feet, and it is important to note that the IS220PPROH1A cannot be automatically reconfigured when swapping BPPB P-Pack with BPPC P-Pack
The IS220PPROH1A has a high-speed processor and two fully independent 10/100 Ethernet ports. The package has a hardware reset circuit and a watchdog timer. The temperature is monitored by internal sensors.

IS220PPROH1A

其他型號推薦：

IS220PPROH1A